GM EEZ READERS

		FORD EEZ READERS
	CHRYSLER EEZ READERS
	SATURN EEZ READERS
	HONDA EEZ READERS
	TOYOTA EEZ READERS
	MITSUBISHI EEZ READERS
	EEZ QUICK PAK STORAGE
	ORDERING INFORMATION
	EEZ READER HOME PAGE

GM EEZ READER ® - EEZ GM10

EEZ GM10	Kwys	Vehicle Usage	Locks	Price
	B82 B86 B89 B91	Cavalier 1995+ Riviera & Skylark 1994+ Achiva & Aurora 1994+ Grand Am & Sunfire 1994+ Suburb./Pickups 1994+	Doors Decks	$56.00

is designed to help you decode the GM 10 Wafer system. This system is found on many GM model vehicles starting in the year 1995. Application of this tool depend a lot on the model of vehicle (See Below).

**WAFER POSITIONS :**
Vehicle	1995 CAVALIER										1996 CAVALIER, SKYLARK, ACHIEVA, SUNFIRE, & GRAND AM
Spaces	*1	2	3	4	5	6	7	8	9	*10	*1	2	3	4	5	6	7	8	9	*10
Ignition
Door						X	X	X	X	X			X	X	X	X	X
Trunk			X	X	X	X							X	X	X	X	X	X
Rear Comp																	X	X	X	X

Spaces are shown bow to tip.

"X" are spaces the EEZ GM10 can read.

The GM 10 wafer ignition is side-bar and cannot be read by the EEZ READER.

Dark Gray indicates spaces not used in the locks.

*Bow cut 1 will never be a 4 depth - Tip cut 10 will never be a 1 depth.

With the 1995 Cavalier, the EEZ GM10 can be used to decode all but first two spaces. Using the standard GM rules, a two step progression is needed for complete key.

With the1996 Cavalier and others, the EEZ GM10 can again be used to decode all but the first two spaces. In this case, you will need to read the Rear Compartment lock also.

**WAFER POSITIONS :**
Vehicle	1996 1/2+ CAVALIER, SKYLARK, ACHIEVA, SUNFIRE, & GRAND AM										1995-96+ S/T & C/K Series PICKUPS, ASTRO, BLAZER, SAFARI, SUBURBAN
Spaces	*1	2	3	4	5	6	7	8	9	*10	*1	2	3	4	5	6	7	8	9	*10
Ignition
Door			X	X	X	X	X	X	X							X	X	X	X	X
Trunk				X	X	X	X	X	X	X						X	X	X	X	X
Rear Comp							X	X	X	X						X	X	X	X	X

		Spaces are shown bow to tip. "X" are spaces the EEZ GM10 can read. The GM 10 wafer ignition is side-bar and cannot be read by the EEZ READER. Dark Gray indicates spaces not used in the locks. *Bow cut 1 will never be a 4 depth - Tip cut 10 will never be a 1 depth.
	As in earlier years, the EEZ GM10 can be used to decode all but the first two spaces in the N body cars such as 1996 1/2 Cavalier and others. In this case, you will need to read the door and trunk.
	However, if you are using the tool on the 1995+ S/T & C/K Series Pickups & Vans, the EEZ GM10 can only give you 6 of the 10 spaces needed. In this case, you will need to progress 4 spaces.

GM SPECIFICATIONS :

Vehicle Usage

GM N body vehicles 1995 to present, C/K Pickups and other GMC vehicles.

Spacing	Depths
1 - 1.034 2 - .9415 3 - .8495 4 - .7575 5 - .6655 6 - .5730 7 - .4810 8 - .3890 9 - .2970 10- .2045	0 1 - .315 2 - .290 3 - .265 4 - .240

Keys

P1102/B82 - P1106/B86 - P1107 B89

Codes

AA00-ZZ99 - A000-Z999
0A00-6Z99 - 0000-6999

Code Card

XF215 - CF215

Depth Set

AGK618

GM EEZ READER ® - EEZ B84

EEZ B84 (ALPHA TECH)	Keyways	Vehicle Usage	Locks	Price
	B68 B84	Cavalier 1991-94 Skylark 1992-93 Achiva 1992-93 Grand Am 1992-93	Ignition	$79.00

blenavhh.gif (1060 bytes) is a tricky one, and thank goodness this lock was used for limited time. Yet by looking at the "Vehicle Usage" in the above table, you can see there are a lot of these cars on the road. Our EEZ B84 is the way to tackle this monster !

The problem starts with the specifications of the lock. In our testing of several dozen new locks, no two seemed exactly alike. Furthermore, the way the wafers settle in the lock also created an obstacle. The 2 wafer settles deeper than the 3. Therefore, when reading the lock with our tool, the 2 depth is gauged deeper than the 3 depth. Depths 1, 4, and 5 read fine. But because the 2 and 3 are so close in depth, sometimes there is trouble in telling the two apart, especially on a worn lock.

By using standard GM rules, we believe you can decode the lock. It helps it there are some 1s, 4s, or 5s in the lock. Most of the trouble on this lock seems to be when the locks have lots of 2s and 3s.

**WAFER POSITIONS :**
SPACES -IGNITION	1	2	3	4	5	6
Trap Slot Up	X		X		X
Trap Slot Down		X		X		X

Spaces are shown bow to tip.

"X" are spaces the EEZ B84 can read.

The Alpha Tech wafer ignition is side-bar yet it can be read by the EEZ READER.

Remember to apply GM rules in decoding of lock.

Since all of the ignition locks are column mount, it is difficult if not impossible to get enough head room to read the other side of the ignition lock. Therefore, we include a handy mirror and special clip which mounts over the ignition lock scalp. In this case, you will have to read, using the mirror and think backward.

ALPHA-TECH SPECIFICATIONS :

Vehicle Usage

Chevrolet Cavalier 1991 +
Buick Skylark 1991-92
Oldsmobile Achiva 1991-91
Pontiac Grand AM 1991-92

Spacing	Depths
1 - .413 2 - .512 3 - .610 4 - .709 5 - .807 6 - .906	1 - .248 2 - .224 3 - .200 4 - .177 5 - .154

Keys

B68 - B84

Codes

Standard GM Codes.

Code Card

XF206

Information provided by Bob Thompson.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holder.

Contents:

GM EEZ READER ® - EEZ GM10

GM EEZ READER ® - EEZ B84